86 158 01078718    86 551 65628861
You are here: Home » News » Fiberglass Fabrication Products connected introduction

Fiberglass Fabrication Products connected introduction

Views: 0     Author: Site Editor     Publish Time: 2022-12-06      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Fiberglass Fabrication Products have brought a great deal of convenience to our production and life, thus what's the introduction of Fiberglass Fabrication Products? Next, allow us to take a glance.

Fiberglass Fabrication Products


Here is that the content list:

l Chopped strand mat

l Continuous strand mat

l Surface felt

l Needle felt



Chopped strand mat

Cut Fiberglass Fabrication Products raw yarn (sometimes conjointly use straight roving) into 50mm length, unfold it arbitrarily however equally on the mesh belt, so apply emulsion adhesive or sprinkle powder binding agent thereon and bond it once heating and activity into shredded strand mat. Shredded strand mats square measure in the main employed in hand lay-up, continuous board creating, and compression molding, and SMC processes. The standard necessities for the shredded strand mat square measured as follows: ① The space quality is uniform on the dimension direction; ②The shredded strands square measure equally distributed within the mat surface while not giant holes, and therefore the binder is equally distributed; ③Has moderate dry felt strength; ④Excellent The rosin infiltration and porousness.



Continuous strand mat

The glass strands are shaped throughout the drawing method of Fiberglass Prototype or the continual strands straight from the strand tube square measure arranged on an eternal moving mesh belt in an exceedingly figure of eight and square measure secured by a powder adhesive. The fiber within the continuous fiberglass epitome protofilament mat is continuous, therefore the reinforcement result on the stuff is best than that of the shredded strand mat. In the main employed in pultrusion, RTM, pressure bag, and glass mat bolstered thermoplastic (GMT) processes.



Surface felt

Fiberglass Prototype sometimes got to type a resin-rich layer, which is usually achieved by victimization medium-alkali glass surface mats. This sort of felt is created of medium-alkali glass (C), thus it endows optical fiber bolstered plastic with chemical resistance, particularly acid resistance. At constant time, as a result of the fiberglass custom product felt skinny and therefore the diameter of the optical fiber is skinny, it will absorb additional rosin to create chic rosin. The layer covers the lines of optical fiber bolstered materials (such as checkered cloth) and plays a job in surface modification.



Needle felt

Fiberglass custom product needled felt could also be divided into shredded fiber needled felt and continuous strand needled felt. Shredded fiber needled felt is to cut the optical fiber roving into 50mm, arbitrarily lay it on the substrate placed on the belt earlier, so use a barbed needle for needle punching, and therefore the needle can pierce the shredded fiber into the substrate and therefore the crochet needle brings up some fibers to create a three-dimensional structure. The substrate used will be a skinny material of optical fiber or different fibers, and this needled felt encompasses a downy feel the most uses of the fiberglass epitome embrace heat insulation and sound insulation materials, heat lining materials, and filter materials. It also can be employed in the assembly of FRP, however, the strength of FRP is low, and therefore the scope of use is restricted. Another variety of continuous strand needle felt could be a felt within which continuous glass strands square measure arbitrarily thrown onto an eternal mesh belt with a wire throwing device, so needled through a needle plate to create a three-dimensional structure within which fibers square measure interconnected. This sort of felt is principally employed in the assembly of Fiberglass Fabrication Products bolstered thermoplastic stampable sheets.



By specializing in FRP composites for nearly twenty years, XHY FRP delivers innovation, R&D, molding, one-stop built solutions, advanced producing, obtaining deep comprehensive challenges and demands to collaborate with our customers to boost their product and meet upgrading demands. Our main product is square measure fiberglass automotive elements, fiberglass turbine elements, fiberglass telecommunication products, fiberglass construction products, fiberglass housing, and enclosure product, fiberglass construction product, fiberglass water treatment tanks, fiberglass custom products, OEM/ODM FRP products, etc. If you're inquisitive about fiberglass custom products, you'll contact us Our website is https://www.xhyfiberglass.com/.


QUICK LINKS

CONTACT US

 
   info@xhyfrp.com.cn
    86-15801078718
Plant No.4, Area E, Nanju Industrial Park,Hangbu Town, Shucheng County, Anhui, China

Leave Message
                                            Copyright © 2021 HEFEI XINGHAIYUAN ENERGY TECHNOLOGY CO.,LTD. All Rights Reserved